How to install the oxygen concentrator housing

02 Jul 2022

After we check the internal parts, how to install the oxygen concentratorhousing?

Supply

Oxygen concentrator

Tools

Screwdriver, Two flat screws, Two thick point head screws, Four thin point head screws, Two nuts

Method

1. Press firmly on the upper buckle, then press the buckle next to the display screen, and finally press the front buckle.

2. Press firmly on the upper buckle, then press the buckle next to the display screen, and finally press the front buckle.

3. The flat screws and nuts are screw on the intake filter box and the dust-free storage box. Thick, pointed screws are screw close to the front. Thin, pointed screws are screw to the point of the machine.

4. Confirm whether the housing of the oxygen concentrator was installed and put the hepa filter back.

5. Confirm that the oxygen concentrator can start using.

Keywords:

Originally published 02 Jul 2022, updated 02 Jul 2022.